TRIMRIB
Utilising the very latest in rollforming technology, Trimrib® is manufactured as either Trimrib® (S) single swage and Trimrib® (V) which incorporates two “V” swages between the ribs.Each profile is aesthetically pleasing, having been designed with modern building style in mind and creating contrasts of light and shade in straight lines. Trimrib® enables rapid water shedding from the roof with a low minimum pitch requirement of 3 degrees, and when coupled with or without one of the pre-painted surface finishes, Trimrib® ensures the completed project provides purpose and visual appeal.
Applications
Residential roofing and cladding
Rural and lifestyle roofing and cladding
Industrial and commercial Roofing and cladding
Drape/spring curving
Crimp curving
Fencing
Roof Pitch
In accordance with E2/AS1 of the NZ Building Code, the minimum pitch for Trimrib® is 3°. For roof lengths greater than 18m.
Materials
Zincalume® Steel: 0.40 or 0.55mm BMT, AZ150 (150gm/ m2) G550 Mpa Yield Stress
Galvanised Steel: 0.40 or 0.55mm BMT, Z450 (450gm/
m2) G550 Mpa Yield StressPre-painted Colorcote or Colorsteel® over Zincalume®
0.40 or 0.55mm BMT, AZ150 (150gm/m2), G550 Mpa Yield StressPre-painted Colorcote or Colorsteel® over Galvanised Steel: 0.40 or 0.55mm BMT ZM275 (275gm/m2) G550 Mpa Yield Stress 0.55mm BMT may be supplied as G300 Mpa Yield Stress
